Betafence R2000, Installation Manual

Page: 38 / 40

38
Robusta SC
10. Overview motorization:
Use of ‘Normal’ motor for up to 30 cycles/day. For more intensive use, the
‘Intensive’ motor is advised.
Motorization: See table below:
(1)
Up to 6m free passage. Use the “844 ER16” motor up to 30 cycles / day
(2)
For more intensive use the “844 ER16” motor. The intensive motor is needed
in case of “dead man” or R2000 more than 6m free passage.
(3)
Safety strips mounted on the guiding post
- two safety strips with single post.
- four safety strips with single post and cabinet.
Two strips on post and two strips on cabinet
Type Motorization table
Model 500 line 1000 line
Underbeam R2000 R2800
Application Normal use
(1)
Normal use
Motor 746 ER16
(2)
844 ER16
Controller Board 780D 780D
Plug-in receiver 866MHz 866MHz
Nr of transmitters 2 2
photocells XP20W D XP20W D
Nr. of photocells 2 2
Height photocells 180 / 900mm 180 / 900mm
Warning Light light 230V LED light 230V LED
Safety edges Resisitive ASO 65 ST Resisitive ASO 65 ST
Nr. of safety edges
on GP 2
(3)
standard
4
(3)
with cabinet
2
(3)
standard
4
(3)
with cabinet
Safety edges on
front wing Resisitive ASO 65 ST Resisitive ASO 65 ST
Safety edges on
rear wing - -
Wireless
transmission
system JCM 3G Radioband JCM 3G Radioband