Betafence R2000, Installation Manual

Page: 20 / 40

20
Robusta SC
ATTENTION!
Hold the wheels on their place and prevent them from rolling
towards the guiding post.
7) Now lower the gate until the rear guiding
wheels and the guiding post is resting on the
washers of the ground anchors. Put on each
ground anchor a washer and a nut. Tighten the
nuts slightly for temporary fixation. Remove
straps from the base plate of the guiding post.
ATTENTION!
Ensure that cables and wires are not crushed between surfaces
while lowering and positioning the gate onto the ground anchors.
8) If you have a double wing sliding gate, please repeat all steps
of point 4.3 and 4.4 for to install the 2nd gate.