2
24
engi
n
e dis
a
s
sem
bl
y
Be careful of the two centring pins
5
on the crankca
-
se half.
Remove the tightening nut
6
which fastens the
flywheel
7
to the crankshaft.
Once the nut has been unscrewed, pay attention to
the special elastic washer (
8
shown in the following
images) placed between the nut and the flywheel.
Two centring pins 5 dedicated to the flywheel cover
(injection version).
Nut 6 which fastens flywheel 7 to the crankshaft
(injection version).
6
7
5
Starter flywheel removal (injection version) with spe-
cial gear puller A.
A
To remove the flywheel, screw the relevant extractor
A
(code 3625173)
onto the threaded segment on
the flywheel and, using a box spanner, tighten the
screw on the extractor.
