2
46
engi
n
e dis
a
s
sem
bl
y
A
2
3
4
5
Hit the left crankcase half
2
lightly with a rubber
or plastic hammer until it detaches from the right
crankcase half
3
. Remove the two screws blocking
the engine to the equipment and disassemble the
crankcase by hand.
ATTENTION:
The gearbox unit and the crankshaft
must remain inside the right crankcase half.
Remove the back
4
and front reference bushes
5
to
position the crankcase correctly. Remove the gasket
between the two crankcase halves.
Loosen the two screws
A
which fasten the engine to
the support stand.
Two screws A blocking engine to engine support
stand.
Detaching crankcase halves.
The left crankcase half (inside) with references pins
4 and 5.
Disassembly of crankcase.