2
89
E
N
G
IN
E ASS
E
M
B
LY AN
D CO
NTRO
LS
Coolant pump cover: pay attention to washer 3.
4 screws that fasten the outer clutch cover to the
inner cover.
Detail of screw 5 to be applied with the engine
coupled to a vehicle.
Couple the water pump cover to the inner
clutch cover applying the four M6x40 screws,
making sure to apply the copper washer
3
to the lower screw of the pump cover.
Tighten all thirteen screws at a torque of
10Nm following a criss-cross pattern.
If only the outer clutch cover was removed,
put it back on the inner cover and fasten the
six M6x25 screws as shown in the figure.
The M6x30 screw
5
, not present in the figu-
re, is coupled to the engine applied to the
vehicle because this maintains a spacer in
position upon which the brake pedal return
spring in engaged.
3
4
5
10Nm
