1
32
ENGI
N
E DIS
A
S
SEM
BL
Y
Remove the two screws
4
which fasten the
start motor to the crankcase and pull out
the start motor.
In order to extract the kick-start gear
5
, di-
sassemble the primary gear (see par. 1.7)
and the pin
6
which supports the idler whe-
el for oil pump control (see par. 1.5.1). The
kickstart gear is pulled out by hand.
In order to disassemble the torque limiter
7
, completely loosen the screw
8
which fa-
stens the torque limiter to the crankcase.
Pull out the washer
9
together with the li-
miter itself.
In order to remove the idler wheel
10
, just
remove the circlip
11
and pull the gear off.
Screws 4 fixing start motor to crankcase.
Removal of pin 6.
Torque limiter 8, screw 7 and washer 9.
Idler wheel 10 of electrical ignition device.
10
7
5
4
6
8
9
11
