2
65
E
N
G
IN
E ASS
E
M
B
LY AN
D CO
NTRO
LS
EXPLODED VIEW OF GEARSHIFT
5) Thrust washer 14x30x1;
6) Gearshift return spring;
7) Spring guide;
8) Pawl return spring;
9) Movable pawl;
10) Gearshift drive shaft.
Gearshift drive shaft: note the positioning of the
gearshift return spring.
For reassembly, couple the movable pawl
9
to the drive shaft
10
and, while compressing
it, insert the spring
8
between the mova-
ble pawl and the drive shaft. Then apply the
spring guide
7
, the gearshift return spring
6
and finally the 14x30x1 thrust washer
5
.
The gearshift return spring must be positio-
ned as in the figure to be able to carry out
its function.
