2.
Install 52-1/2" long wall studs, between the wall plates, over the 'X' marks and
where the plates meet. Use 10d sinkers. Nail wall frames together.
3.
Install a 83-1/2" long tie plate flush with the end of the wall frame.
4.
Cut a 52-1/2" long 2x4 and install at the end of the wall frame.
X
X
X
X
X
X
X
X
X
X
X
X
Step 7
Build Back Wall For 10' Building
Siding Extends 3/4" Below Plate
1.
Cut (4) four 68" long 2x4s to a length of 56". Position these 2x4s together and indicate
with 'X' marks, where the wall studs will be located. Mark the ends that will butt together
with the letters 'A' and 'B'.
LAP Edge
56" Wall Plate
24"
24"
23-1/4"
56" Wall Plate
83-1/2" Tie Plate
56" Bottom Plate
A
B
A
B
28-1/2" Tie Plate
Siding Extends
3-3/4" Beyond Frame
B
B
5.
Cut (2) two siding panels to a length of 59-3/4". Save the cutoffs.
6.
Cut the 12" side siding panels, cutoffs from the front wall, to a
length of 59-3/4".
7.
Install these siding panels as shown below.
A
A
23-1/4"
