1x4-47" Gable Trim
1x4-72" Gable Trim
Use 8d galv. nails to install trim
Step 12
Install Trim
1.
Install 47" and 72" long gable trim, flush with the top of the roof sheathing.
2.
Install 77-1/2" long 1x3 trim, at the front corner, flush with he siding on the sidewall.
3.
Install 60" long 1x3 trim, at the rear corner, flush with the siding on the sidewall.
4.
Install the remaining 1x4 trim boards at the fsidewall corners.
77-1/2" Long 1x3 Trim
1x3-60" Trim
(not Seen)
5.
Install (2) two 1x3x72" boards along each side of the door opening, flush with the bottom edge
of the siding. Tack these boards with a couple nails; you may want to move the trim later when
you install the doors. Install a 1x3x55-1/4" board, that has angle cuts on both ends, across the
top of the side trim.
1x4 Trim Sidewall Trim
