77-3/4"
88"
87"
71-1/2"
56-3/4"
1.
Locate a 69-1/2" long 2x4 with angle cuts on both ends.
2.
Locate a 47" long 2x4 with a 2x4 block
attached to one end.
"
"
"
"
"
Same Measurements
Step 1
Assemble End Walls
3.
Locate wall studs, see detail right, that
measure the length shown. Measure from
the longest side of the board.
4.
Locate a 71-1/2" (Red End) and a 24-1/2"
long 2x4.
5.
Place this framing on the floor as shown.
6.
To hold the perimeter 2x4's in position, nail
14-1/2" long 2x4 blocks to the floor.
7.
Nail 2x4 wall studs to the top and bottom
plates using 10d sinkers. Nail 2x4s together
at the peak. Nail a 14-1/2" long 2x4 to the
4th stud to help secure the bottom plate.
2x4 Block
71-1/2" Long Plate
128"
2x4 Block
24-1/2"
Long Plate
2x4 Block
2x4 Blocks
71-1/2" Long 2x4
24-1/2" Long 2x4
2x4 Block
Note: The angle measurement of the wall should be 128". See drawing below.
Overall frame height will be approximately 96-1/2".
2x4 Block
2x4 Block
