Berthold MicroPolar LB 566, User Manual

Page: 62 / 176

Chapter 6. Technical Data
62 MicroPolar (++) LB 566
6.4
Format of Serial Data Output RS232 and RS485
Headline
Date·Time  State  Status  Synchronizer  Product  Att  Phi  R2  Tint  IN1  IN2  PT100 
C  Cm  C2  C2m  MF1  MF2
Following lines
01.01.2005·00:00:00  0000  0  0  1  0.43  5.30  0.07  0.0  0.0  0.0  0.0 
1 2 3 4 5 6 7 8 9 10 11 12
75.36  75.00  0.00  0.00  0.000  0.000¶
13 14 15 16 17 18
Column no. Description Format
1 Date and time DD.MM.YY·HH:MM:SS
2 State 4 digits, HEX
3 Status: Information about the quality of the last
measurement
0 : Measurement OK
< 0 : Error
4 Product synchronization 5: not active
1: still asynchronous
0: all values synchronous
-1: Error
-2: Time too short for syn.
-3: Speed outside range
5 Product number X (1 to 4)
6 Attenuation [dB] X.XX
7 Phase [°/GHz] X.XX
8 Dispersion of the phase regression X.XX
9 Device temperature [temperature unit] X.X
10 Current input 1 [unit of current input] X.X
11 Current input 2 [unit of current input] X.X
12 PT100 temperature [temperature unit] X.X
[…] with selection of the unit g/cm
3
13 Concentration 1 live X.XX [X.XXXX]
14 Concentration 1 averaged X.XX [X.XXXX]
15 Concentration 2 live X.XX [X.XXXX]
16 Concentration 2 averaged X.XX [X.XXXX]
17 Mass flow for concentration 1 X.XXX
18 Mass flow for concentration 2 X.XXX
Special characters
“  ” Tabulation“¶” Carriage Line feed “·” Blank character