Berthold MicroPolar LB 566, User Manual

Page: 113 / 176

Chapter 4. Software Functions
MicroPolar (++) LB 566 21
Markers:
Enter a value and a name (up to 5 characters) for the
marker here. The presentation takes place in the live dis-
play and refers to the bar chart. To disable the marker,
select a marker value outside of the chart limits or the
current output limits.
4.2.7 General Data
Date:
 Enter the current date
Time:
 Enter the current time
Tag:
 Enter the name of the measuring point. The tag (max.
8 characters) is displayed in the header on the dis-
play.
4.2.8 Measurement
Meas. Mode:
Select continuous or batch. In Batch mode, an average
value is calculated between start and stop. In Continuous
mode, a moving averaging is calculated depending on the
adjusted averaging number.
Start Mode:
The measurement device can be started or stopped via
external terminals (digital input) or via keyboard.
Averaging:
Enter the number of averaging processes. This number
indicates over how many measurements the concentra-
tion value is to be averaged (moving average). This is
true only for the measuring mode Continuous.
Reset Averaging:
Reset averaging (yes/no) This refers to Batch and Con-
tinuous.
Current output at stop:
Select "0/4 mA" or "Hold". The selection defines how the
current outputs behave with stopped measurement. This
is true only for the measuring mode Continuous.
1 | - | General Data | 07.05 – 13:25
Date
Time
Tag
⌂◄ ▲ ▼ ►
1 | - | Measurement | 07.05 – 13:25
Meas. mode
Start Mode
Averaging
Reset averaging
Current Out at stop
⌂◄ ▲ ▼ ►