BERTHOLD TECHNOLOGIES LB 567, User Manual

Page: 27 / 186

Chapter 3. System Description
MicroPolar 2 (++) LB 567 27
3.7.2 Flow Cell
The flow cells are available in nominal widths from 50 to 150 mm
(see Figure 3-10) and with different flanges. For technical data
please see
chapter 6.2 Technical Data Sensors .
A
A
B
B
Pipeline with
nominal width
50 ... 150 mm
Adapter flange with
threaded connector,
clamp connector or
ASA flange (options)
A: High-frequency connections
B: Process connection, flanges of different sizes
The flow cell consists of a sturdy stainless steel body. The micro-
wave transmitter and receiver are firmly welded to the outside of
the pipe. The entire product pipe is PTFE-coated and thus meets
the special requirements for use in food for use in food.
There are no objects that extend into the pipe (e.g. a measuring
sensor). The flow cell can be installed in the pipeline using a
flange, threaded connector or clamp connector. The adapter
flanges are available as accessories.
The flow cell has two HF ports to feed in and output the micro-
wave signals. The input and output can be allocated as needed
(M-Tx, M-Rx). The microwave signals transmit the product over
the entire pipeline cross-section.
Figure 3-10:
Flow cell