BERTHOLD TECHNOLOGIES LB 567, User Manual

Page: 123 / 186

Chapter 4. Software Functions
MicroPolar 2 (++) LB 567
27
4.2.16 Sampling
The header includes the following information (from left to
right):
•
Product no.
•
Current table position / Total number of entries
•
Sample no. of current table position
•
Date and time of sampling
Up to 30 sample entries are possible. The sample can be as-
signed to the lab value either via the sample no. or through
data/time. The sample no. is assigned on a continuous basis.
If a sample is deleted, the sample no. will not be assigned a
second time. Up to 999 sample numbers are available. Only if
all numbers have been assigned, you may assign a number for
the second time; you will be alerted accordingly by a message
on the display.
Next sample:
Continue with the next sample.
Active:
You can choose if this sample should be taken into account
in the calibration.
Measured value:
Display of the measured values, calculated with the actual
coefficient.
Lab value:
Entry position for the lab value.
Advanced:
Switches to the next data page.
Delete:
Briefly push the softkey to delete the indicated sample en-
try. Push this key for a longer time to delete all sample
entries.
1 | 1/1 | Sample # 1 | 07.05 –13:25
Next sample
Active Yes
Measured value 65.50%
Lab value 0.00 %
Advanced
◄ DEL ▲▼ ..√..