BERTHOLD TECHNOLOGIES LB 567, User Manual

Page: 117 / 186

Chapter 4. Software Functions
MicroPolar 2 (++) LB 567
21
4.2.7 General Data
Date:
•
Enter the current date
Time:
•
Enter the current time
Tag:
•
Enter the name of the measuring point. The tag (max.
8 characters) is displayed in the header on the display.
4.2.8 Measurement
Meas. Mode:
Select continuous or batch. In Batch mode, an average
value is calculated between start and stop. In Continuous
mode, a moving averaging is calculated depending on the
adjusted averaging number.
Start Mode:
The measurement device can be started or stopped via ex-
ternal terminals (digital input) or via keyboard.
Averaging:
Enter the number of averaging processes. This number in-
dicates over how many measurements the concentration
value is to be averaged (moving average). This is true only
for the measuring mode Continuous.
Reset Averaging:
Reset averaging (yes/no) This refers to Batch and Contin-
uous.
Current output at stop:
Select "0/4 mA" or "Hold". The selection defines how the
current outputs behave with stopped measurement. This is
true only for the measuring mode Continuous.
1 | - | General Data | 07.05 – 13:25
Date
Time
Tag
⌂◄ ▲ ▼ ►
1 | - | Measurement | 07.05 – 13:25
Meas. mode
Start Mode
Averaging
Reset averaging
Current Out at stop
⌂◄ ▲ ▼ ►