Bernina Artista 630 User Manual Download Page 43

Page: 43 / 167

Practical Stitches - Applications

Manual Darning

Stitch:

Needle:
Thread:

Feed dog:

Presser foot:

Straight stitch No. 1
size and type suitable for the fabric selected
darning thread
down (darning position);
Darning foot No. 9

Darning Holes or Worn Areas

Replaces both lengthways and crossways
threads in all fabrics.

Preparation

•

stretch fabric into darning hoop (optional
accessory) to prevent distortion

•

use the slide-on table

Sewing

•

move the darning hoop smoothly by
hand

•

work from left to right without using
pressure

•

when changing direction on top and on
bottom, move in curves (avoid points as
this prevents holes and thread breakage)

•

work in different lengths so that the
thread is better spread over the fabric

Poor stitch formation

•

if the thread is lying on the
right side of the fabric, the
hoop is being moved too
quickly

•

if there are knots on the wrong
side of the fabric, the hoop is
being moved too slowly

Thread breaks

•

if thread breakage is a
problem, it could be that the
hoop is not being moved
smoothly

1. Stitch Over the Hole

•

sew the first rows to cover the hole (not
too close, sewing beyond the worn area)

•

work the rows in irregular lengths

•

turn work by a quarter turn - 90°

2. Cover the First Rows

•

sew over the first rows - not too close for
a soft finish

•

turn work by a half turn - 180°

3. Complete

Darning

•

sew loosely and in same direction as 2nd
rows

031196.50.04_0507_a630_EN

Summary of Contents for Artista 630








































































































































































Search results

Summary of Contents for Artista 630

Reviews:

Related manuals for Artista 630

Brands by name

Popular brands

Bernina Artista 630, User Manual

Search results

Summary of Contents for Artista 630

Reviews:

Related manuals for Artista 630

Brands by name

Popular brands