Bernina Artista 630 User Manual Download Page 96

Page: 96 / 167

Setup-Program

Opening Setup Program

• press the Setup button
• selection menu appears
• touch «4»
• the screen for calibrating the touch

sensitivity of the screen appears

Saving and Closing

• touch «OK»
• changes are saved, the screen

closes and the selection menu
appears

Closing Screen

• touch «ESC»
• the screen display closes, the

original settings remain saved
and the selection menu
appears

Touch (Screen Sensibility)

Touch Setup

• touch the Calibration symbol
• a further screen display appears

Touch 2

Press and hold stylus on the center of the
target. The target will move. Repeat this
process until all three positions are calibrated
and the screen change back to the original
screen. Save the settings with «OK».

031196.50.04_0507_a630_EN

Summary of Contents for Artista 630








































































































































































Search results

Summary of Contents for Artista 630

Reviews:

Related manuals for Artista 630

Brands by name

Popular brands

Bernina Artista 630, User Manual

Search results

Summary of Contents for Artista 630

Reviews:

Related manuals for Artista 630

Brands by name

Popular brands