Bernina Artista 630 User Manual Download Page 151

Page: 151 / 167

151

Messages

Motif does not fit into the attached hoop

No embroidery module is attached.

Data transfer

Mega-Hoop up

Mega-Hoop center

Mega-Hoop down

Main Motor failed. Check hook system.

Attach a larger embroidery hoop or reduce
the size of the motif

Attach embroidery module to the embroidery
computer.

As soon as the data transfer is compledted,
the messeage will disappear and the selected
function will be carried out.

Move the Mega-Hoop to Upper (1) position.

Move the Mega-Hoop to Middle (2) position.

Move the Mega-Hoop to Lower (3) position.

Remove any remnants of thread from the
hook area/bobbin case.

031196.50.04_0507_a630_EN

Summary of Contents for Artista 630








































































































































































Search results

Summary of Contents for Artista 630

Reviews:

Related manuals for Artista 630

Brands by name

Popular brands

Bernina Artista 630, User Manual

Search results

Summary of Contents for Artista 630

Reviews:

Related manuals for Artista 630

Brands by name

Popular brands