Bernina Artista 630 User Manual Download Page 113

Page: 113 / 167

113

Connecting the Adapter

Connecting the Adapter for Free Arm Embroidery (Optional Accessory)

The adapter is used for embroidering tubular items (sleeves, trousers, infant items, socks, etc.)
on the free arm of the sewing computer.

Attaching the Adapter to the Sewing
Computer

• push the adapter behind the free arm

towards the sewing computer so that the
connecting lugs engage in the base plate
of the sewing computer

Attaching the Module to the Adapter

• place the module on the adapter with the

front edge of the module as close as
possible to the L-shaped guide on the
adapter

• push the module towards the guide from

the left until the connecting lugs engage in
the base plate of the adapter

Free Arm Embroidery Hoop

• the small, oval embroidery hoop is specially

designed for free arm embroidery

Caution!
Only the small hoop can be
used for free arm embroidery.

Removing the Adapter

• remove the module from the adapter
• the rear right corner of the adapter is

designed to be used as a grip

• hold the adapter with this grip and remove

from the base plate of the sewing
computer

031196.50.04_0507_a630_EN

Summary of Contents for Artista 630








































































































































































Search results

Summary of Contents for Artista 630

Reviews:

Related manuals for Artista 630

Brands by name

Popular brands

Bernina Artista 630, User Manual

Search results

Summary of Contents for Artista 630

Reviews:

Related manuals for Artista 630

Brands by name

Popular brands