Bernina Artista 630 User Manual Download Page 15

Page: 15 / 167

Operating instructions

CFL Sewing Light (CFL = Cool Fluorescent Light)

Contrary to an ordinary bulb, the CFL sewing
light has a better illumination and a longer
life.

Upper Thread Tension

The Basic Setting

• is indicated when the red line on the

tension adjustment wheel is in line with
the marking

• the tension does not need adjusting for

normal sewing work

• for special sewing work, the tension can

be adjusted to suit the fabric

Thread Tension Settings

Perfect Stitch Formation
• the stitch formation is in the fabric

Upper Thread Tension too Tight

• the lower thread is pulled more to the

right side of the fabric

• to reduce the upper thread tension turn

tension adjustment wheel to 3 - 1

Upper Thread Tension too Loose

• the upper thread is pulled more to the

wrong side of the fabric

• to increase the upper thread tension turn

tension adjustment wheel to 5 - 10

The tension is factory set for the best results
with Metrosene 100/2 threads (Arova Mettler,
Switzerland).

If other threads are used, the tension may
need adjusting to suit the fabric and chosen
stitch.

Caution:
Please note that a defective
CFL sewing light must ONLY
be replaced by an authorized
technician. The sewing
computer must be brought to
an authorized BERNINA
dealer!

For example:

Tension

Needle

Metallic
thread

approx. 3

Mono-
filament

approx. 2-4

031196.50.04_0507_a630_EN

Summary of Contents for Artista 630








































































































































































Search results

Summary of Contents for Artista 630

Reviews:

Related manuals for Artista 630

Brands by name

Popular brands

Bernina Artista 630, User Manual

Search results

Summary of Contents for Artista 630

Reviews:

Related manuals for Artista 630

Brands by name

Popular brands