53
Basic Sewing Procedures
•
Attach the invisible zipper foot to the machine.
•
Adjust needle center position and select the straight
stitch.
–
The stitch length depends on the fabric.
•
Vary from 1,0 to 3,0mm.
•
Place the open zipper face - down on right side of
fabric as shown in the picture.
•
Align the fabric edge with the 5/8 inch marking line on
the stitch plate.
•
Place the zipper 6mm (1/4 inch) below raw edge of
garment.
•
With right-hand groove of the foot over the zipper coils,
sew along the zipper until the foot hits the zipper pull.
•
Remove the garment from the machine.
To attach the other half of the zipper, align the fabric edge with
the 5/8 inch marking line on the stitch plate as shown in the
picture.
With the left-hand groove of the foot over the zipper coils, sew
along the zipper until the foot hits the zipper pull.
•
Close zipper.
•
Fold the fabric that the zipper is on the right hand side
out of the way as shown in the picture.
•
Use a pin to fix the fabric.
•
Change to the regular sewing foot and sew along the
zipper as closely as possible using straight stitch.
•
At last secure with some forward and reverse stitches.
A Right side of the fabric
B Wrong side of the fabric
This foot is used to insert invisible zippers so that they are
covered by the seam, and therefore hidden.
* The invisible zipper foot accessory is optional. It is not included with this machine.
Invisible zipper insertion
1.0~3.0
3.5
1
A
B
A
1.0~3.0
3.5
1
A
B
A
1.0~3.0
3.5
1
A
B
A
