Bernette Chicago 5 Instruction Manual Download Page 73

Page: 73 / 104

Special Functions

Several stitch patterns can be combined in one sewing
sequence using the memory function.

–

These pattern sequences can be stored for later
use.

–

Even when the sewing machine is switched off the
memory contents are retained.

Memory

Multiple patterns selecting from pattern groups

can be com-

bined together.

A Group Patterns

B Group Patterns

Block Style Alphabet (C1-Group Patterns)

Script Style Alphabet (C2-Group Patterns)

Direct Group Patterns and A Group Patterns 86-99 can’t be
stored in the memory.

This machine has 4 memories and each of them can store
up to 20 stitches.

All the units in the memory can be edited in their functions
such as stitch length, stitch width, elongation, mirror image
and Auto-Lock, except when sewing with the

ote

twin needle

Summary of Contents for Chicago 5









































































































Search results

Summary of Contents for Chicago 5

Reviews:

Related manuals for Chicago 5

Brands by name

Popular brands

Bernette Chicago 5, Instruction Manual

Search results

Summary of Contents for Chicago 5

Reviews:

Related manuals for Chicago 5

Brands by name

Popular brands