Bernette Chicago 5 Instruction Manual Download Page 88

Page: 88 / 104

Warnings

Warning message

Warning display

Bobbin thread is low

This message is displayed when the bobbin thread is

running out.

BH lever is not lowered

This message is displayed when the buttonhole or

darning stitch was selected and the start/stop button

was pressed while the buttonhole lever is raised.

BH lever is not lifted

This message is displayed when the stitch other than the

buttonhole or darning stitch was selected and the start/

stop button was pressed while the buttonhole lever is

down.

Press the OK button to confirm

The sewing machine is blocked

The exclamation message means that the thread is

twisted or jammed or the fabric is too thick and the hand

wheel cannot move.

•

Please look through the «Trouble shooting guide» on
page 88-90 to resolve the problem.

Summary of Contents for Chicago 5









































































































Search results

Summary of Contents for Chicago 5

Reviews:

Related manuals for Chicago 5

Brands by name

Popular brands

Bernette Chicago 5, Instruction Manual

Search results

Summary of Contents for Chicago 5

Reviews:

Related manuals for Chicago 5

Brands by name

Popular brands