Bernette Chicago 5 Instruction Manual Download Page 55

Page: 55 / 104

Basic Sewing Procedures

Zipper Insertion*

Inserting a centered zipper

Baste the zipper opening on the garment.

•

Press open the seam allowance.

•

Place the zipper face down on the seam allowance
with the coils against the seam line.

•

Baste the zipper tape.

•

Attach the zipper foot.

•

Attach the right side of the presser foot pin to the
holder when sewing the left side of the zipper.

•

Attach the left side of the presser foot pin to the
presser foot holder when sewing the right side of the
zipper.

Stitch the left side of the zipper from top to bottom.

•

Stitch across the lower end and right side of the zipper.

•

Remove the basting and close the zipper.

The zipper foot should be used for sewing with center
needle position, straight stitch only. It is possible that the
needle could hit the presser foot and break when sewing
other patterns.

tteNtioN

Summary of Contents for Chicago 5









































































































Search results

Summary of Contents for Chicago 5

Reviews:

Related manuals for Chicago 5

Brands by name

Popular brands

Bernette Chicago 5, Instruction Manual

Search results

Summary of Contents for Chicago 5

Reviews:

Related manuals for Chicago 5

Brands by name

Popular brands