Berner 343774, Original Instructions Manual

Page: 17 / 207

English | 17
1 609 92A 44P • 27.11.17
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product
are: Sound pressure level 75 dB(A); Sound power
level 86 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and un-
certainty K determined according to EN 60745-2-3:
Surface grinding (roughing): a
h
=13.5 m/s
2
,
K=1.5 m/s
2
.
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical Data” is in
conformity with all relevant provisions of the direc-
tives 2011/65/EU, 2014/30/EU, 2006/42/EC in-
cluding their amendments and complies with the
following standards:
EN 60745-1:2009+A11:2010,
EN 60745-2-3:2011+A2:2013+A11:2014+
A12:2014+A13:2015,
EN 55014-1:2006+A1:2009+A2:2011,
EN 55014-2:1997+A1:2001+A2:2008,
EN 50581:2012.
Technical file (2006/42/EC) at:
Berner Trading Holding GmbH
Bernerstraße 6
74653 Künzelsau
GERMANY
i.V. Bert Habets
Senior Director Continuous Improvements
02.11.2017, Berner Trading Holding GmbH
Bernerstraße 6
74653 Künzelsau
GERMANY
Assembly
Battery Charging
Note: The battery supplied is partially charged. To
ensure full capacity of the battery, completely
charge the battery in the battery charger before us-
ing your power tool for the first time.
The lithium-ion battery can be charged at any time
without reducing its service life. Interrupting the
charging procedure does not damage the battery.
The lithium-ion battery is protected against deep
discharging by the “Electronic Cell Protection
(ECP)”. When the battery is empty, the machine is
switched off by means of a protective circuit: The
inserted tool no longer rotates.

Do not continue to press the On/Off switch af-
ter the machine has been automatically
switched off. The battery can be damaged.
Observe the notes for disposal.
Grinder BACAG BL 12V
Art. No. 344064
343774
Rated voltage V= 12
Rated speed min
-1
19500
Grinding disc diameter,
max. mm 76
Mounting hole diameter mm 10
Weight according to
EPTA-Procedure 01:2014 kg 0.70/0.89*
Protection class /
II
Permitted ambient
temperature
– during charging
– during operation
*
and
during storage
°C
°C
0...+45
–20...+50
Recommended batteries BBP 12V x.xAh
BACP 10,8V
Li x.x Ah
Recommended chargers BBC 12V
BACC 10.8 V Li
* depending on the battery pack being used
** Limited performance at temperatures <0 °C
OBJ_BUCH-2851-002.book Page 17 Monday, November 27, 2017 11:55 AM