Thermostat NO contact with centre plate, time-controlled
Operating thermostat
You can navigate through the menu using the four push-buttons below the display. In the menu
the functions can be set and activated and settings can be adjusted.
The operation can also be carried out when the operating unit is removed.
If no push-button is actuated for longer than 3 minutes, the device returns automatically to
the previous function and basic display.
In the basic display, press the
Info/OK
(11) push-button.
Information on the current operating mode/function is displayed as scrolled text. The device
returns to the basic display by re-pressing
Info/OK
.
Press
Menu
/
s
(8) push-button.
The basic display disappears.
MENU
appears briefly in the function display (16). A help
text on the current selection is shown at the bottom of the display (12) as scrolled text. The
menu can be selected.
The device returns to the last display/setting in the menus by pressing
Menu
/
s
. The device
returns again to the basic display by pressing
Menu
/
s
repeatedly.
Press
+/–
(9/10) push-button.
Operating modes/functions and settings menus are changed. A description appears below
in the display.
Press
Info/OK
(11) push-button.
Function selection:
The current function selection is confirmed. Carry out any necessary settings using the
+/–
(9/10) push-button if required and press
Info/OK
(11) to confirm.
Settings:
The selection of the settings menus is confirmed. Carry out further settings with the
+/–
(9/10) push-button and press
Info/OK
(11) to confirm.
Once all settings have been completed, the device returns to the basic display. The
selected function appears in the display (16).
In the settings menus identifiers of the function also appear as scrolled text in the display
(15) in addition to the adjustable function.
Adjusting setpoint temperature manually
The setpoint temperature can always be adjusted in the
AUTO
and
MAN
operating modes.
The device is in the basic display.
Press
+/–
(9/10) push-button.
The current setpoint temperature flashes.
Keep pressing the
+/–
push-button repeatedly until the desired temperature is displayed.
Press the
OK
(11) push-button to save the displayed temperature.
The device returns to the basic display.
The
readout
AUTO
– indicates that the manually adjusted setpoint temperature deviates
from the temperature stored in the time temperature program. The temperature is
controlled according to the changed setpoint temperature until the next event.
Switch off controller
The device is in the basic display.
Keep the
Menu
/
s
push-button (8) pressed for 10 s.
The display first returns to the menu. The device returns to the basic display after 10 s. The
function display (16) indicates
OFF
.
The controller is switched on again by selecting an operating mode/function.
97-09920-000
Page 3/15
10/2011
