Berkel BM+42F, Use And Maintenance Manual

Page: 25 / 84

9
1.8 - Protections and safety devices
WARNINGS
!
Before using the machine, make sure all the safety devices are installed and function cor-
rectly. At the beginning of each shift check the presence and position of the safety devices. If
they are not correctly installed or if they are missing, call the maintenance operator
.
3.Stainless steel hopper solidly fixed to the feeding opening
4. Protective device for electric elements.
The lower part of the machine is closed by a protection which prohibits anything
entering to the electrical elements placed inside.
5.Micro on the hopper
In the lower part of the hopper, there is a magneto at the level of the safety
sensor.
WARNINGS!
Do never tamper the safety devices.
1.9 - Working position
The correct operator’s position to grant an excellent work is indicated in fig . 1.9.1.
1.Meat exit, plate holes of less than 8 mm.
In this case the fingers cannot enter the holes.
On request, it is possible to install plates with
outlet holes larger than 8 mm.
In this case the user must provide a protection
for this opening.
2. Hand protection.
The hopper is equipped with a hand protection
"2" Fig.1.8.1 p. 13 , complying with the Ministry
of Labour and Social Security n° 66 of the
05.09.79.
Fig. 1.9.1
1
5
3
2
4
Fig. 1.8.1