BERG EasyKit Technical Handbook Download Page 6 | Manualshive

Page: 6 / 45

BERG EasyKit Technical Handbook Download Page 6

Translated user manual

EasyKit

page 6 of 45

3. Summary of the safety measures

3.1 Textual markings

IMPORTANT:

This indicates that something can greatly influence the

EasyKit

, its

maintenance and operation.

WARNING:

This indicates a possible dangerous situation, which if not avoided, could

result in serious injury or even death.

DANGER:

This indicates a possible dangerous situation, which if not avoided, will

result in serious injury or even death.

3.2 Review of the safety pictograms used

The

EasyKit

is provided with safety pictograms in order to bring possible dangers or

dangerous situations to the attention of the operator. You must comply with these warnings
at all times.
The pictograms provided must be clearly visible and remain undamaged.
If any questions arise with respect to these pictograms, please contact Berg Hortimotive
directly.

Danger of electrical voltage

Dangerous chemical battery: explosive gases and
corrosive battery acid

Attention!

Danger of becoming trapped - beware of moving parts

«
...
4
5
6
7
8
...
»

Summary of Contents for EasyKit














































Reviews:

No comments