Translated user manual
EasyKit
page 31 of 45
8.8 Cleaning procedure
Always switch off the
EasyKit
before cleaning. Always switch off the
EasyKit
using the earth switch and remove the charging plug from it.
If the cleaning is to be carried out by other than the personnel operating the
machine, e.g. the cleaning department or an external cleaning firm, it is
important that they are given the correct instructions on how to clean the
machine in safety.
For cleaning, you must always take into account the requirements that are
given on the safety sheet for the battery (see appendix 4).
Regularly remove any remains of plants, leaves, etc, and brush off any sand and dust. Clean
the
EasyKit
with a dry/damp cloth and soft brush. It is also possible to clean the
EasyKit
using compressed air, provided that it is dry. Never pour water over the
EasyKit
or clean it
using a steam or high-pressure water cleaner which could lead to serious damage being
caused to the electrical circuits in the equipment.
Prior to applying a cleaning agent, please check whether it is suitable to be
used on the materials used in the construction of the
EasyKit
. In case of
doubt, please contact the Berg Hortimotive dealer.
8.9 Repairs
Repairs may only be carried out under the direction of the Berg Hortimotive dealer during the
guarantee period.
Repairs and maintenance activities should be recorded in the maintenance logbook - see
appendix 1.
All components that are replaced should at least meet the specifications of the original parts.
Deviations from the above instructions could have serious consequences for
the safety of the machine. In such cases Berg Hortimotive will accept no
liability.