Translated user manual
EasyKit
page 14 of 45
5. Transport
Transporting the
EasyKit
must be undertaken with great care in order to avoid
damage or accidents occurring.
5.1 External transport
When the
EasyKit
has to be transported, please do as follows:
1. Set the direction switch to neutral (0) and the speedometer to speed 0.
2. Switch off the
EasyKit
using the earth switch (disconnect the supply plug from the
socket).
3. Allow the platform to descend and remove the stands.
4. Secure the
EasyKit
properly so that it cannot move about, roll forward or tilt over.
5. Ensure that the
EasyKit
remains frost-free during transportation.
6. When arriving at its destination, the
EasyKit
should be set up in accordance with the
points described at chapter 6 (starting up).
6. Starting up
The
EasyKit
is only suitable for operating on pipe rail systems that comply
with the horticulture sector guidelines, the health and safety catalog in force in
the Netherlands for pipe rail systems.
The
EasyKit
should only be used on the correct type of pipe rail system. You
must ensure that the centre-to-centre measurement of the pipe rails and the
EasyKit
correspond with each other - see chapter 10: Specifications. This is
also visible on the pictogram on the platform.
The
EasyKit
may only be operated once it has been placed entirely on the
pipe rail system.
The
EasyKit
may not be switched on when the protective covers are not
properly in place. Prior to switching on the
EasyKit
all protective covers must
be properly put back in place.
Only use the
EasyKit
for the purposes for which it was designed. The
EasyKit
may only be used for maintaining crops in greenhouses. Never use the
machine on the public highway.
Using the
EasyKit
when it is tilting more than 2 degrees from the vertical
(lengthwise and/or crosswise) is strictly forbidden.