Translated user manual
EasyKit
page 15 of 45
Ensure that the recommendations from the manual with respect to voltage (V)
and frequency (Hz) are respected. Always remove the charger plug before
using the
EasyKit
.
Additional options, accessories and spares must be ordered and supplied
exclusively by the manufacturer, Berg Hortimotive.
Safety pictograms attached to the
EasyKit
(see chapter 3.2: Review of the
safety pictograms that are used), must always be clearly visible.
Extra care must be given during installation!
The chances of incorrect functioning during start-up is higher than normal. If
the
EasyKit
is not set up correctly, this can lead to greater exposure to danger.
Please ensure that all locks and fixings have been correctly applied.
The
EasyKit
has been specially designed to run on a pipe rail system. When leaving the Berg
Hortimotive factory, the
EasyKit
is checked for proper functioning and safety. Before starting
up the
EasyKit
, the items described at section 6.1 should be inspected.
The pipe rail system must comply with the requirements as laid down by the horticulture
sector guidelines. Article 6.3 in the guidelines provides information regarding the minimum
pipe rail specifications with respect to the track width, pipe diameter and the distance
between supports.
The pipe rail specification given on the EasyKit are taken from the requirements laid down by
the horticulture sector guidelines for pipe rail systems from the health and safety catalog in
force in the Netherlands. For the full contents of this policy regulation, we refer you to the
Ministry of Social Affairs & Employment.