Appendix
NewSonic SonoDur-R
Issue 105 06/2020
Page 77
1141001
SONO-CAL-Instr
DAkkS Calibration for Instrument plus Probe according to DIN 50159-2. Indirect Check of
calibration curve plus direct calibration (force, Vickers diamond angle and tip) - not available
for motor probes
SONO-1M, SONO-3M and SONO-8M
Delivery time: approx. 3-4 weeks
Hardness levels between 150HV and 900HV or 25 HRC and 67 HRC.
xxx= Hardness value, y=test load in kgf
Hardness testing blocks 80x16 mm incl. MPA Certificate DAkkS for one test force
1140810
SONO-B140HVy
Round Hardness Blocks, approx. 140±15 HVxx; Ø80x16 mm, including MPA Certificate
DAkkS Calibration for each test block and test force (HV10 or HV5 or HV1) according to DIN
EN ISO 6507-3 please specify requested test force for Certification with your order
1140811
SONO-B240HVy
Round Hardness Blocks, approx. 240±15 HVxx; Ø80x16 mm, including MPA Certificate
DAkkS Calibration for each test block and test force (HV10 or HV5 or HV1) according to DIN
EN ISO 6507-3 please specify requested test force for Certification with your order
1140822
SONO-B280HVy
Round Hardness Blocks, approx. 280±15 HVxx; Ø80x16 mm, including MPA Certificate
DAkkS Calibration for each test block and test force (HV10 or HV5 or HV1) according to DIN
EN ISO 6507-3 please specify requested test force for Certification with your order
1140812
SONO-B420HVy
Round Hardness Blocks, approx. 420±15 HVxx; Ø80x16 mm, including MPA Certificate
DAkkS Calibration for each test block and test force (HV10 or HV5 or HV1) according to DIN
EN ISO 6507-3 please specify requested test force for Certification with your order
1140813
SONO-B560HVy
Round Hardness Blocks, approx. 560±15 HVxx; Ø80x16 mm, including MPA Certificate
DAkkS Calibration for each test block and test force (HV10 or HV5 or HV1) according to DIN
EN ISO 6507-3 please specify requested test force for Certification with your order
1140814
SONO-B620HVy
Round Hardness Blocks, approx. 620±15 HVxx; Ø80x16 mm, including MPA Certificate
DAkkS Calibration for each test block and test force (HV10 or HV5 or HV1) according to DIN
EN ISO 6507-3 please specify requested test force for Certification with your order
1140823
SONO-B700HVy
Round Hardness Blocks, approx. 700±15 HVxx; Ø80x16 mm, including MPA Certificate
DAkkS Calibration for each test block and test force (HV10 or HV5 or HV1) according to DIN
EN ISO 6507-3 please specify requested test force for Certification with your order
1140815
SONO-B840HVy
Round Hardness Blocks, approx. 840±15 HVxx; Ø80x16 mm, including MPA Certificate
DAkkS Calibration for each test block and test force (HV10 or HV5 or HV1) according to DIN
EN ISO 6507-3 please specify requested test force for Certification with your order
Training
11505
SONO-THT
Introduction into hardness testing and Instruments operation, plus travel expenses, living, per
hour
11506
SONO-TR
Group training Hardness Testing, Instrument Operation, per 1/2 day and person, 4 individuals
max., plus travel expenses
