Operation and Menu Structure
NewSonic SonoDur-R
Issue 105 06/2020
Page 45
7.11.3
Motor / Manual
The operating mode for motor measuring probes can be set in the Motor/Manual (refer to
menu (also refer to "Performing a measurement with motor measuring probes"). Switching
between the (automatic) motor operation and the manual operation of the motor probe will extend
the vibrating rod. When touching the surface, the measuring start will commence automatically. The
measuring value will be generated and displayed when the set penetration time has elapsed. In this
context, the motor probe behaves similar to a hand-held measuring probe, but features an
adjustable application time of the testing force.
7.11.4
Automatic Closing
This function opens the setting options for the default storage of measurement series.
7.11.4.1
Manual Closing
The factory setting is "Manual Closing"; in this case, the user must save the measurement series at
the appropriate time via the "Save File" menu.
7.11.4.2
Semi-automatic Closing
When choosing semi-automatic closing, the number of measurements can be pre-selected and will
be shown in rectangular brackets. The dialogue for saving the series of measurements will be invoked
once the preset number of measured 1 (6 in this case) is reached.
Figure 7.84
Figure 7.85
Figure 7.86
Figure 7.87
