Operation and Menu Structure
NewSonic SonoDur-R
Issue 105 06/2020
Page 50
7.11.8
Presentation of Measuring Value
The display of the mean value and the last measured value can be changed in Settings ->
Measurement display. This causes an interchange of the representation of the mean value and the
individual value. In the example below, the single value (small) is now displayed after the mean value
(large).
WARNING
At the factory, SonoDur is set to "Mean value large". It must be ensured that the correct setting is
selected so that the correct measured value can be read!
7.11.9
Comment Function
To every measuring set a short note can be added. To use this function, it must be enabled first:
Change to Settings -> Comment to file and select
“Request”.
When storing a measuring s
et, a message box appears displaying “Add a comment
to file?”. If the
question
is answered with “Yes”, an input field opens.
Figure 7.105
Figure 7.106
Figure 7.107
Figure 7.108
Figure 7.109
