![background image](http://html1.mh-extra.com/html/beper/40-110/40-110_use-instructions_2736295007.webp)
7
Nebulizer Use instructions
7
EN
PROFESSIONAL PISTON COMPRESSOR NEBULISER
Dear Customer,
this nebuliser is a high-quality device for inhalation the-rapy for asthma, chronic bronchitis, and other respiratory illnesses. This
medical device generates aerosols with variable characteristics to adapt to the patient’s respiratory pathology and generating a
medicinal mist of particles that are small enough to reach even the deepest regions of your lungs and be of maximal benefit.The
operation and usage of the device is very straightforward. All common liquid medication can be used for inhalation therapy.
Please read through these instructions carefully so that you understand all functions and safety information. We want you to be
happy with your Piconeb product. For any further questions you may have, please ask your chemist or usual retailer.
IMPORTANT SAFETY INSTRUCTIONS
This device may only be used for the purposes described in this booklet. The manufacturer cannot be held liable for damage
caused by incorrect application. This device is not suitable for anaesthesia and lung ventilation.This device should only be used
with original accessories as shown in these instructions. Do not use the device if you think it is damaged or notice anything
unusual. Never open the device. This device comprises sensitive components and must be treated with caution. Observe the
storage and operating conditions described in the «Technical Specifications» section. Protect it from: - water and moisture - ex-
treme temperatures - impact and dropping - contamination and dust - direct sunlight - heat and cold. Only use the medication
prescribed for you by your doctor and follow your doctor’s instructions with regard to dosage, duration and frequency of the
therapy. All accessories should only be used by one person. Never bend the nebuliser over 60°.
- The unit should not be used in the presence of anesthetic mixture inflammable with air, oxigen or nitrous oxide.
- Device not protected against splashe
Ensure that children do not use the device unsupervised some parts are small enough to be swallowed.
Use of this device is not intended as a substitute for consultation with your physician.
In view of their length, the power cord and connection hose could constitute a strangulation hazard.
PREPARATION AND USAGE OF THIS DEVICE
Prior to using the device for the first time, we recommend cleaning it as described in the section «Cleaning and Disinfecting».
1
Assemble the nebuliser kit
12
Ensure that all parts are complete.
2
Fill the nebuliser with the inhalation solution as per your doctor’s instructions. Ensure that you do not exceed the maximum level.
3
Connect the nebuliser with the air hose
6
to the compressorm
1
and plug the power cord
2
into the socket.
4.
Switch the
ON/OFF switch
3
to position
«I»
to turn on the device and place the mouthpiece
7
in the mouth or fit one of the face masks
over mouth and nose. The mouthpiece gives you a better drug delivery to the lungs. Choose between adult
8
or child face
mask
9
and make sure that it encloses the mouth and nose area completely.
5.
Breathe in and out calmly during the therapy. Sit
in a relaxed position with the upper body upright.
Do not lie down while inhaling.
Stop inhalation if you feel unwell.
6
After
completing the inhalation period recommended by your doctor, switch the ON/OFF switch
3
to position
«O»
to turn off the
device and unplug it from the socket.
7
Empty the remaining medication from the nebuliser and clean the device as described
in the section «Cleaning and Disinfecting».
CLEANING AND DISINFECTING
Thoroughly clean all components to remove medication residuals and possible impurities after each treatment.The compressor
1
and the air hose
6
should be clea-ned with a clean, moist cloth.
Always wash your hands well before cleaning and disinfecting the accessories.
Do not expose the compressor to water or heat.
Replace the air hose for each treatment with a new patient or in case of impurities.
Unplug the device before cleaning.
Cleaning with water
Wash all nebuliser components (except air hose) under warm tap water
(max 60 °C) for about 5 minutes
adding
if necessary a small quantity of detergent following dosage and use limitations as provided by detergent manufacturer. Rinse
thoroughly making sure that all deposits are washed away and leave to dry.
1
Piston compressor
2
Power cord
3
ON/OFF Switch
4
Air filter compartment
5
Nebjet Nebulizer
6
Air hose
7
Mouthpiece
8
Adult face mask
9
Child face mask
10
Nosepiece
11
Replacing air filter
12
Assembling nebuliser kit
Beper
Summary of Contents for 40.110
Page 22: ...www beper com...
Page 23: ......