11
status of the control outputs
Any activated outputs are shown by their number
(example shows all 4 outputs active). The function of
an outputs is determined by the configuration.
process errors
Any process errors during the firing. On the left hand
side an „E“ is shown followed by an error code if
applies (example shows code „A4“). Refer to appendix
A for a complete listing and explanation of all errors.
Power consumption since programme start
Displays the total power consumption since last
programme start. The TC507 calculates this value by
adding up the heating cycles. Make sure that the kiln
power rating is properly set in the configuration (see
appendix C, parameter 1).
Operation time of the heating elements
The TC507 adds up the net operation times of the
heating elements (ie. only the duration where they
were actually under power) since programme start.
This allows you to check the load of the kiln or the
efficiency of the heating elements.
Total operation time of heating elements
As before but time is added up to a total value to
check lifetime of the heating elements. Very useful
feature to proove warranty claims as well as getting an
impression about how intensive a kilns has been used.
For safety reasons reset to zero only by manufacturer.
Realtime clock display: day of week and time
Your TC507 is also available with a real time clock
(optional, can be installed at anytime) for automatic
commencing programmes. If your TC507 is fitted with
this option this display is shown to check current day
of week and time (hours / minutes).
Z3
Z 1
Z2
Z3
Z 1
Z2
Z3
Z 1
Z2
Z3
Z 1
Z2
Z3
Z 1
Z2
Z3
Z 1
Z2
