21
Troubleshooting
No video is displayed on the screen.
• Verify that the proper cables have been installed and selected between the transmitter input
jack and your high-definition equipment jack.
• At your projector side (connected to the receiver), select HDMI as the input source.
• Verify the power indicator and
SOURCE
indicators of the receiver and the transmitter. See
the following or
LED indicators of the transmitter and the receiver on page 8
for more
information.
LED indicator
OSD
display
Possible solutions
Power indicator:
blinking blue
(4 levels
looping)
• Ensure the transmission range between the transmitter and
the receiver is NOT beyond 30 meters (100 feet)
transmission distance in line of sight.
• Try to move the transmitter closer to the receiver.
Power indicator:
solid blue
Source
indicator: slow
flashing
• Ensure your video resolution and frame rate is recognized
and supported.
• Connect the source device to your display to check and
modify the video format compatibility.
• Check if your video resolution with HDMI input from your
device is set among 1080p, 1080i, 720p, 576p, or 480p.
Please refer Chapter 5 for the detail supported Resolution.
Power indicator:
solid blue
Source
indicator: fast
flashing
• Ensure the proper cables are connected between the
transmitter and your source devices.
• Ensure your source devices connected to the transmitter
are turned on.
• Ensure the proper cables are connected between the
receiver and the projector.