![background image](http://html1.mh-extra.com/html/benq/wdp02/wdp02_user-manual_2735070008.webp)
8 Introduction
Remote control
LED indicators of the transmitter and the receiver
Please refer below for detailed indicator and OSD description of the transmitter and the receiver.
1.
Power button
Press to turn the transmitter &
receiver on/off. When both power
indicators of Tx & Rx are in red, press
the power button on either Tx or Rx
to wake up the other automatically.
2.
INFO
button
Press this button to display OSD of
system related information on the
display terminal connected the
receiver.
3.
IR
button
Press to switch the IR blaster
frequency between 36KHz to 56KHz
to meet source device’s requirement.
See
Performing IR sync on page 17
for
details.
4.
SOURCE
button
Press to switch the input sources
connected to the transmitter directly.
Power indicator
(on Rx)
Source indicator
(on Rx)
OSD Display
(on Rx)
Item/Mode
Status Description
Blinking blue
Blinking
(4 levels
looping)
Initial boot up/
warm up
It takes about 15~20 seconds
for booting up.
Blinking blue
Blinking
/
(looping
display)
Searching
available
channels
Continuing search available
channels if system can’t
establish the link for over 80
seconds after initialization.
(Note 1 & 4)
Static blue
Blinking
(Quickly)
Wireless
linked mode
No input from selected
source. (Note 2)
Static blue
Blinking (Slowly)
Unrecognizable video format.
(Note 3)
Static blue
Static blue
Video format is recognized.
1
2
3
4