background image

34 

Using the projector  

5.

Real

: This setting displays the image in a one-to-one pixel mapping 

without alteration or resize in the center of the projection. This is most 
suitable for use with PC source inputs.

•  The black portions are inactive areas and the white portions are active 

areas.

•  OSD menus can be displayed on those unused black areas.

Using Panamorph lenses (optional)

Panamorph lenses allow you to convert 16:9 projectors to the full 2.35:1 aspect ratio of most motion 
pictures, showing the best movies without letterbox bars at top and bottom of images while increasing 
resolution by 33% and brightness by 20%.

You may need a 2.35:1 screen to display the 2.35:1 images. For more information, please go to 
www.panamorph.com or contact the place you purchased the projector.

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys 
for navigating the picture.

•  Using the OSD menu
1. Press 

MENU

 and then press 

/  until the 

Display

 menu is highlighted.

2. Press

 

 to highlight 

Digital Zoom

 and press 

ENTER

. The Zoom bar displays.

3. Press   repeatedly to magnify the picture to a desired size.
4. To navigate the picture, press 

ENTER

 to switch to the panning mode and press the directional 

arrows ( ,  ,  ,  ) on the projector or remote control to navigate the picture.

5. To reduce size of the picture, press 

ENTER

 to switch back to the zoom in/out function. You can also 

press   repeatedly until it is restored to the original size.

The picture can only be navigated after it is magnified. You can further magnify the picture while searching for details.

4:3 picture

2.35:1 aspect ratio 
image

2.35:1 aspect ratio image 
using the entire resolution 
of the 16:9 display

2.35:1 aspect ratio image 
in a 2.35:1 display area

Pressing 

LB

 on 

the remote 

control

Using Panamorph 

lens

http://www.pureglare.com.au

Summary of Contents for W7000+





























































Reviews: