12
Positioning your projector
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation locations.
Your room layout or personal preference will dictate which installation location you select. Take into
consideration the size and position of your screen, the location of a suitable power outlet, as well as the
location and distance between the projector and the rest of your equipment.
*To set the projector position:
1.
Press MENU on the projector or remote control and then press /
until the System Setup menu is highlighted.
2.
Press
/
to highlight Projector Position and press /
until the correct position is selected.
1. Front:
Select this location with the projector placed near
the floor in front of the screen. This is the most
common way to position the projector for quick
setup and portability.
3. Rear:
Select this location with the projector placed near
the floor behind the screen.
Note that a special rear projection screen is
required.
*Set
Rear
after you turn the projector on.
2. Front Ceiling:
Select this location with the projector suspended
from the ceiling in front of the screen.
Purchase the BenQ Projector Ceiling Mount Kit
from your dealer to mount your projector on the
ceiling.
*Set
Front Ceiling
after you turn the projector
on.
4. Rear Ceiling:
Select this location with the projector suspended
from the ceiling behind the screen.
Note that a special rear projection screen and the
BenQ Projector Ceiling Mount Kit are required for
this installation location.
*Set
Rear Ceiling
after you turn the projector
on.
http://www.pureglare.com.au
