36
Using the projector
Displaying more than one image source
simultaneously
Your projector is capable of displaying pictures simultaneously from two input sources, which can be used
to enhance your presentation in an interesting way. Ensure the signals you want to display are correctly
connected to the projector.
To display the PIP window:
• Using the remote control
Press
PIP
to display the
PIP
page and make adjustments by following the
steps starting from step 3 in the section
"Using the OSD menu"
below.
When the PIP window is on, to change the PIP window size, press
SIZE
repeatedly until a desired size is selected.
When the PIP window is on, to change the PIP window position, press
POSITION
repeatedly until a desired position is selected.
When the PIP window is on, to highlight one of the sources to make
adjustments, press
ACTIVE
repeatedly until the source is selected.
• Using the OSD menu
1. Press
MENU
and then press / until the
Display
menu is
highlighted.
2. Press
to
highlight
PIP
and press
ENTER
. The
PIP
page displays.
3. Highlight
PIP
and press / to select
On
.
The projector will select two currently active signals to display and the last viewed picture will be
displayed on the big screen as a main source.
The PIP function is effective at below source combinations.
4. To change the
Main Source
or
PIP Source
, press to highlight
Main Source
or
PIP Source
and press
ENTER
. The source selection bar displays.
5. Use / to highlight the source you want to display for the main (bigger) or second (smaller)
window, and press
ENTER
to save the setting and go back to the
PIP
page.
6. To make OSD settings to one of the two sources (main or second), highlight
Active Window
and
press / to select the source you want to make adjustments.
The settings made on the OSD menus will only take effect on the active window. The following
OSD menu function cannot work on the active windows for the PIP: Auto Source Search.
7. To change the position of the smaller picture, highlight
Position
and press / repeatedly until a
suitable position is selected.
8. To resize the small picture, highlight
Size
and press / to set the PIP size among
Small
or
Large
.
9. To save the settings and leave the OSD menu, press
MENU
once or
EXIT
repeatedly until the menu
disappears.
Source 1/2
HDMI 1/2
PC
V
Video
V
S-Video
V
Component 1/2
V
http://www.pureglare.com.au