![background image](http://html1.mh-extra.com/html/benq/mp511-svga-dlp-projector/mp511-svga-dlp-projector_user-manual_2734668052.webp)
Maintenance
52
4.
Remove the lamp cords from the slots.
5.
Disconnect the lamp connector by
pushing it against the projector while
pulling it up.
6.
Loosen the screw that secures the lamp.
7.
Lift the handle so that it stands up. Use the
handle to slowly pull the lamp out of the
projector.
•
Pulling it too quickly may cause the lamp to break
and scatter broken glass in the projector.
•
Do not place the lamp in locations where water
might splash on it, children can reach it, or near
flammable materials.
•
Do not insert your hands into the projector after
the lamp is removed. If you touch the optical
components inside, it could cause color
unevenness and distortion of the projected
images.
8.
As shown in the figure, hold the new lamp first
and align the lamp with the compartment in
the projector, and then insert the lamp all the
way into the projector.