background image

4 Introduction 

 

Introduction

This device is a Full HD wireless transmission device.

• Uncompressed Full HD Image Quality with 3D Support

 This solution delivers uncompressed 1080p full HD video with all types of 3D content from a Blu-

ray/DVD player, set-top box, game console, or even a computer to BenQ 1080P 3D video 
projectors wirelessly as well as 5.1 channel digital audio.

• Stream up to 30m (100 feet) with no Latency, Great for Gaming

 With four built-in omni-directional antennas, this solution transmits uncompressed video content 

up to 30 meters (100 feet, Line of sight)* with no latency ideal for video gaming.

• Ultra Stable and Fluent Streaming Quality 

 This solution operates at 4.9 GHz~ 5.9 GHz frequencies and features “Dynamic Frequency 

Selection” technology that adjusts the communication frequency automatically in case of 
interference from another RF system and provides stable and fluent transmission quality for your 
full HD content.

• Enhanced IR Functionality

 IR Blaster Cable is included in the package so users can point their original remote control of the 

AV source at the receiver directly to control source devices like switching channels.

Package content

Transmission distance depends on actual environment. Stated distance is based on line-of-sight measurement. 
Structures constructed of steel, wood, concrete, or brick may decrease transmission distance.

Transmitter (Tx)

Receiver (Rx)

Remote Control

Tx_Adapter

Rx_Adapter

User Manual

Summary of Contents for FHD



















Reviews: