12 Installation
6. Ensure your projector is already turned on and being switched to the correct HDMI source.
7. Press
SOURCE
button on the remote control or on the top of the receiver/the transmitter for
source input switching until you see the video being transmitted.
8. If all operation is normal, the power indicator and source indicator will both glow in solid blue.
Please refer below for detailed indicator and OSD description of the transmitter and the
receiver.
Item/Mode
Status Description
Power
indicator (on
Rx)
Source
indicator (on
Rx)
OSD Display (on Rx)
Standby
Power saving
Static red
off
Initial boot up/
warm up
It takes about 15~20
seconds for booting up.
Blinking blue
Blinking
Searching
available
channels
Continuing search
available channels if
system can’t establish
the blink for over 80
seconds after
initialization. (Note 1 &
4)
Blinking blue
Blinking
Wireless linked
mode
No input from selected
source. (Note 2)
Static blue
Blinking
(Quickly)
Unrecognizable video
format. (Note 3)
Static blue
Blinking
(Quickly)
Video format is
recognized.
Static blue
Static blue
HDMI
IR IN
Y/Pb/Pr
Video
RGB
S-Video
HDMI
SOURCE
HDMI
2
1
2
1
4 levels looping
looping display
