7
Introduction
Remote controller
1.
Power button
Press to turn the transmitter &
receiver on/off.
When both power
indicators of Tx & Rx are in red, press
the power button on either Tx or Rx
to wake up the other automatically.
2.
INFO
button
Press this button to display OSD of
system related information on the
display terminal connected the
receiver.
3.
IR
button
Press to switch the IR blaster
frequency between 36KHz to 56KHz
to meet source device’s requirement.
4.
SOURCE
button
Press to switch the input sources
connected to the transmitter directly.
1
2
3
4
