8 Installation
Installation
This section will guide you on how to prepare the unit before its initial use.
Setting up the transmitter (Tx)
Connect up to two high-definition audio/video sources to the transmitter.
1. Connect the transmitter’s
HDMI 1
/
HDMI 2
jacks to the high-definition AV equipment’s HDMI out
jacks via HDMI cables. The transmitter is equipped with two HDMI jacks for the high-definition
equipment such as Blu-ray Players or video game consoles.
2. Connect the transmitter’s
HDMI OUT
to HDMI input of a second display via an HDMI cable for
the loop-through connection.
3. Connect the supplied power adapter to the
DC
in jack of the transmitter and a wall socket. The
indicator on the power button lights up in blue when the transmitter is connected to the power
socket.
Setting up the IR blaster cable
If necessary, connect the IR Blaster Cable to the IR sensor of you high-definition AV equipment. You
will be able to use the remote control of the source device at the receiver side to directly and
operate the source device like switching channels.
1. Plug one end of IR blaster cable into the
IR OUT
jack of the transmitter.
2. Stick the other end of the IR blaster cable near the IR sensor of your high-definition audio/video
devices and then press
IR
button of remote control to search a good position of IR response.
HDMI
IR Blaster
IR sensor
HDMI Out
