41
Operation (under non-Launcher source)
Below is the overview of the
Advanced
OSD menu.
Likewise, when you wish to switch from the
Advanced
OSD menu to the
Basic
OSD menu, follow
the instructions below:
1. Go to
Advanced
Menu
- System
>
Menu Settings
and press
OK
.
2. Select
Menu Type
and
OK
.
3. Press / to select
Basic
. Next time when you turn on the projector, you may access the
Basic
OSD menu by pressing
(
MENU
).
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock, such as
the Kensington lock, to secure the projector. You can locate a Kensington lock slot on the rear side of
the projector. See item 6 on
A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the lock’s
documentation for finding out how to use it.
Utilizing the password function
Setting a password
1. Go to
Advanced
Menu
- Settings
>
Security Settings
. Press
OK
. The
Security Settings
page
appears.
2. Highlight
Change Password
and press
OK
.
3. The four arrow keys ( ,
,
,
) respectively represent
4 digits (1, 2, 3, 4). According to the password you desire
to set, press the arrow keys to enter six digits for the
password.
4. Confirm the new password by re-entering the new
password.
Once the password is set, the OSD menu returns to the
Security Settings
page.
5. To activate the
Power On Lock
function, press / to
highlight
Power On Lock
and press / to select
On
. Input the password again.
Main menu
& Main
menu icon
Press
(
BACK
) to go to
the previous page.
Sub-menu
Press
(
MENU
) to go to
the previous page
or to exit.
Current
input signal
Status
Press
OK
to enter the
menu.
1
7
6
2
3
4
5
1
5
2
6
3
7
4