60 Maintenance
14. Replace the lamp cover on the projector.
15. Tighten the screw that secures the lamp cover.
16. .Connect the power and restart the projector.Resetting
the light timer
17. After the startup logo, open the On-Screen Display
(OSD) menu. Go to
Advanced
Menu-
Settings
>
Light Settings
and press
OK
. The
Light
Settings
page appears. Highlight
Reset Light Timer
and press
OK
. A warning message is
displayed asking if you want to reset the light timer. Highlight
Reset
and press
OK
. The light time
will be reset to “0”.
• Loose screw may cause a bad connection, which could
result in malfunction.
• Do not over tighten the screw.
Do not reset if the lamp is not new or replaced as this could cause damage.
