BENETEAU First 18, Assembly Manual

Page: 25 / 120

Warning: damaged and/or visibly bent wires have reduced working load and can break under tension.
Before every stepping of the mast, carefully check that the wires are not damaged.
Attach the jib swivel on the stainless steel ring of the textile loop at the shrouds attachments.
Correctly turned jib swivel will have Bartels branding legible when the mast is stepped. Attach the
forestay on the bottom of the swivel.
Warning: forestay Dyneema loop requires a regular check-up and need to be replaced at least every
two seasons. In case of visible damage immediately repace it before continuing using the boat.
Attach both side shrouds, insert the pins and secure them with split pins. Use pliers to twist the split
pins ends and make sure they are placed on inside of the shrouds attachments.
Tape complete shrouds attachment points with electrical tape.