background image

i

Dear Nautique Owner,

Welcome to the Nautique Family! For over 80 years, Nautique has
been dedicated to providing our customers and their families with
the finest inboard boats available. It’s our passion to create the best
performing boats in the industry.  Boats that allow you to escape the
routine of every day life. Our customers don’t just own a Nautique,
they live the Nautique life.

Your boat has been built with the best material and workmanship
available, a legacy handed down from our founder. Our wealth of
experience gives us the edge in innovation, quality and
performance. We have the most dedicated and loyal employees in
the industry. Hands down. Every day, our employees do more than
just punch a clock; they take personal pride in every boat that comes
down the line.  

Review this Owner’s Manual for your boat. We have assembled this
manual to inform you about your Nautique and educate you further
on boating. Please pay particular attention to the safety statements
labeled as 

DANGER, WARNING, CAUTION

and 

NOTICE

. These

statements alert you to possible safety hazards to avoid so you can
have a safer boating experience. There are also many tips and tricks
on care and maintenance sprinkled throughout the manual. Boating
is very important to us and we would like you to enjoy many years of
boating in your Nautique.

By purchasing a Nautique, you have taken the first step in trading
your old lifestyle for a new one. Now that you own a Nautique, life as
you know it will never be the same. 

Enjoy the Nautique Life.

The Nautique Team

Keep your heart with all diligence,
for out of it spring the issues of life.

Proverbs 4:23

P/N 90490

216V fm_2009.qxd:Naut Air fm.qxd  1/23/09  1:38 PM  Page i

Summary of Contents for Crossover 90490







































































































































































































Reviews: